-40%

DTECH Serial RS232 Isolator Optocoupler Male to Fmale RS-232 Optical Isolation

$ 10.54

Availability: 117 in stock
  • Connection Split/Duplication: None (1 : 1)
  • MPN: DT-9011
  • Condition: New
  • Baud Rate: up to 57600 bps
  • Return shipping will be paid by: Seller
  • Isolation voltage: 2500Vrms pulse or continuous 500V DC
  • Type: Adapter/Converter
  • Signal Isolation: RXD,TXD,GND (3 wire)
  • Features: Port-powered
  • Connector A: Serial (RS-232) Female
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • Country/Region of Manufacture: China
  • Non-Domestic Product: No
  • Connector B: Serial (RS-232) Male
  • Brand: DTECH

    Description

    Serial RS232 Optical Isolator
    Transceiver
    Adapter Protect Your RS-232 Devices
    Protects Your DCE and DTE Equipment Against Data Loss and Equipment Damage
    2500Vrms or 500V DC isolation voltage effectively protecting your devices from ground loop noise, transient surges and lightning, etc.
    Optically isolates three wire (TX, RX and GND signals) on both transmit and receive lines.
    It features auto-sensing and self-adjusting that automatically adjusts the baud rate, up to 57600bps;
    Port powered from RS-232 signal (TXD, RTS or DTR), no external power required.
    Suitable for terminal devices using 3 wire system (TXD, RXD and GND), such as modem, router, multi-user system and satellite receiver, etc.
    When you connect your PC to an RS232 device and the ground system is no good state but you don’t know of it, it may lead to your devices in damage and downtime in a hurry!
    Or your project which requires 3 wire RS232 communication between devices ( says two PCB boards) have really huge ground loop noise that messes up the real signal.
    If you have such annoying issues above, don't worry. Just put the RS-232 photoelectric isolator between your devices and it will provides effective protection against over-voltage and keeps the devices safe, then you can obtain reliable data communication.
    S
    imple Operation
    Its female connector is wired as a DCE and should be connected to a DTE port. The male connector is a DTE and should be connected to a DCE port. If you are connecting a DTE to a DTE or a DCE to a DCE, a null modem cable will be needed (not included).
    Specification:
    RS232 Interface A:
    9 pin serial Male port;
    RS232 Interface B:
    9 pin serial Female port;
    Standard:
    EIA RS-232, CCITT V2.4 Asynchronous Protocol;
    RS-232 Signal:
    TXD,RXD, GND
    Isolation Signal:
    TXD,RXD, GND
    Isolation voltage:
    2500Vrms pulse or continuous 500V DC.
    Baud Rate:
    up to 57600 bps;
    Transmission Mode:
    Asynchronous, Full Duplex, Full transparency ;
    Applications:
    Point to point RS-232 communication
    Multi-user system like UNIX
    Remote terminal
    Protect Multi-user terminal device and host
    Protect Satellite receiver
    Protect Program controlled exchanger, Modem, Router
    Protect Two RS232 devices (say ATM machine) that don't have common ground
    ...
    Important Note:
    RS-232 interface defines two types of the terminal devices – DTE (the terminals, PC, printer and router,etc.) and DCE (modem, CSU/DSU, ISDN adapters, satellites, network interface cards or multiplexer,etc.).
    What is included?
    1 x RS-232 to RS-232 Photoelectric Isolation Converter
    1 x User Manual
    Payment
    We accept PayPal only. (Accept credit or debit card and bank payments safely and easily with PayPal.)
    Please understand that for variation listings, there is a drop down menu for you choosing the desired items. We are unable to change any content of your order based on the eBay checkout note or PayPal message.
    Please verify your address during checkout. You may not be able to change the shipping address once the payment is completed due to the shipping status.
    If you are paying via PayPal e-Check, please note that your item can only be shipped after the payment has been cleared. PayPal e-Check payments require 3-4 business days to clear PayPal's system.
    Shipping
    Item location: Carol Stream, IL,US.
    The item will be posted once payment is received, usually within ONE business day.
    Please make sure your shipping address is correct. If you need to change your shipping address after checkout, please contact us and we'll try to update it. However, its success or not will depend on the shipping status; please understand that we are unable to guarantee that the shipping address can be updated after checkout.
    Unfortunately, we do not offer local pick up.
    International Orders: import duties, taxes and other charges are the buyer's responsibility. Please check it with your country's customs office before making an order.
    Contact Us
    If you are satisfied with our transaction, please kindly take a moment to leave a feedback for us. We always care about your thought!
    If you have any doubt about the order, please contact us through eBay message or e-mail and we will provide a reasonable solution for you. Within 1 business days (public holidays not included) a reply will be reached to you.
    If you don't get a response within 1-2 business days, please check your SPAM box in case your email provider has filtered out our emails. Please add us in your contact and email us again.
    Powered by SoldEazy